DJI RoboMaster EP


This multiple mode robot is the full version of the EP with three modes of functionality from DJI. It takes all the best of the drones from DJI and makes a terrestrial robot with an engineer mode, a combat mode, and a hybrid mode.

The modes use the same base chassis with interchanging tools for different tasks.

The robot features cutting-edge equipment and technology, is made of rugged steel, and finished with a sleek, futuristic design. The RoboMaster EP is fully equipped with cutting-edge technologies and integrates with additional technologies that provide an unrivaled platform for classroom learning. The EP includes the structural components:

  1. robotic arm
  2. gripper
  3. Mecanum wheels
  4. high-performance servo
  5. sensor adaptor & power connector module
  6. intelligent controller
  7. infrared distance sensor
  8. high performance motor.

The SDK from DJI provides a powerful programming environment to add more sensors (up to 40 more) and integrate with AI technologies. 

The RoboMaster EP even integrates with popular building blocks.

The RoboMaster EP supports third-party open-source hardware such as Micro:bit, Arduino, and Raspberry Pi. These items can be connected and powered via serial ports on the main controller of the chassis.

The EP Core can also perform model training and scene recognition through AI platforms such as NVIDIA Jetson Nano and the official DJI SDK, enhancing students’ understandings of the operating principles of AI.


Infrared Distance Sensor

Detection Range  0.1-10 m

FOV 20°

Accuracy [1]  5%

Robotic Arm

Range Approx. 10 cm


Weight  Approx. 70 g

Body Dimensions

44.2×22.6×28.6 mm

Transmission Ratio


Operation Modes

Angle mode, Speed mode

Sensor Adaptor

Port Type  IO, AD

Number of Ports 2

Power Connector Module

Communication Port  CAN bus


USB Type-A power port: 5V 2A, Power port with pin header: 5V 4ATX30 power port: 12V 5A


TX30 power port: 12 V


 FOV  120°

Max Still Photo Resolution 2560×1440

Max Video Resolution FHD: 1080/30fps  HD: 720/30fps

Photo Format JPEG

Video Format MP4

Sensor CMOS 1/4″; Effective pixels: 5 MP

Operating Temperature Range -10 to 40 °C (14 to 104 °F)

Hit Detector

Detection Requirements

For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

Maximum Detection Frequency 15 Hz

EP Core

Weight  Approx. 3.3 kg

Dimensions 320×240×270 mm (length × width × height)

Chassis Speed Range 0-3.5 m/s (forward), 0-2.5 m/s (backward), 0-2.8 m/s (sideways)

Max Chassis Rotational Speed 600°/s

M3508I Brushless Motor

Max Rotational Speed 1000 rpm

Max Torque 0.25N·m

Max Output Power 19 W

Operating Temperature Range -10 to 40 °C (14 to 104 °F)

Driver FOC

Control Method Closed-loop speed control


Overvoltage protection

Overtemperature protection


Short-circuit protection

Chip and sensor anomaly detection

Intelligent Controller

Latency [2]

Connection via Wi-Fi: 80-100ms

Connection via Router: 100-120ms (unobstructed, free of interference)

Live View Quality 720p/30fps

Max Live View Bitrate 6 Mbps

Operating Frequency [3] 2.4 GHz, 5.1 GHz, 5.8 GHz

Max Transmission Distance [4]

Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

CE, 2.4 GHz 130 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 90 m

MIC, 2.4 GHz 130 m

Connection via Router:

FCC, 2.4 GHz 190 m, 5.8 GHz 300 m

CE, 2.4 GHz 180 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 180 m

Transmission Power (EIRP)

2.400-2.4835 GHz

FCC: ≤30 dBm

SRRC: ≤20 dBm

MIC: ≤20 dBm

5.170-5.25 GHz

FCC: ≤30 dBm

SRRC: ≤23 dBm

MIC: ≤23 dBm

5.725-5.850 GHz

FCC: ≤30dBm

SRRC: ≤30dBm

Transmission Standard


Intelligent Battery

Capacity 2400 mAh

Nominal Charging Voltage 10.8 V

Maximum Charging Voltage 12.6 V

Battery Type LiPo 3S

Energy 25.92 Wh

Weight 169 g

Operating Temperature Range -10 to 40 °C (14 to 104 °F)

Charging Temperature Range 5 to 40 °C (41 to 104 °F)

Maximum Charging Power 29 W

Battery Life in Use 35 minutes (measured at a constant speed of 2 m/s on a flat surface)

Battery Life on Standby  Approx. 100 minutes

Charger Input 100-240 V, 50-60Hz, 1A

Output Port: 12.6 V=0.8A or 12.6 V=2.2A

Voltage 12.6 V

Rated Voltage

28 W



iOS iOS 10.0.2 or later 

Android Android 5.0 or later 


 Recommended Routers

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)

TP-Link Archer C7; NETGEAR X6S (International) 

Recommended outdoor power supply solution for routers

Laptop Power Bank (match the input power of the router)

microSD card Supports microSD cards with a capacity up to 64GB 

Write a review

Please login or register to review