DJI RoboMaster EP Core
- Brand: DJI EDU
- Product Code: DJI RoboMaster EP Core
- Availability: In Stock
-
$899.00
This is an amazing robot from DJI. It takes all the best of the drones from DJI and makes a terrestrial robot.
The robot features cutting-edge equipment and technology, is made of rugged steel, and finished with a sleek, futuristic design. The RoboMaster EP Core is fully equipped with cutting-edge technologies and integrates with additional technologies that provide an unrivaled platform for classroom learning. The EP Core includes the structural components:
- robotic arm
- gripper
- Mecanum wheels
- high-performance servo
- sensor adaptor & power connector module
- intelligent controller
- infrared distance sensor
- high performance motor.
The SDK from DJI provides a powerful programming environment to add more sensors (up to 40 more) and integrate with AI technologies.
The RoboMaster EP Core even integrates with popular building blocks.
The RoboMaster EP Core supports third-party open-source hardware such as Micro:bit, Arduino, and Raspberry Pi. These items can be connected and powered via serial ports on the main controller of the chassis.
The EP Core can also perform model training and scene recognition through AI platforms such as NVIDIA Jetson Nano and the official DJI SDK, enhancing students’ understandings of the operating principles of AI.
DETAILS
Infrared Distance Sensor
Detection Range 0.1-10 m
FOV 20°
Accuracy [1] 5%
Robotic Arm
Range Approx. 10 cm
Servo
Weight Approx. 70 g
Body Dimensions
44.2×22.6×28.6 mm
Transmission Ratio
512:1
Operation Modes
Angle mode, Speed mode
Sensor Adaptor
Port Type IO, AD
Number of Ports 2
Power Connector Module
Communication Port CAN bus
Output
USB Type-A power port: 5V 2A, Power port with pin header: 5V 4ATX30 power port: 12V 5A
Input
TX30 power port: 12 V
Camera
FOV 120°
Max Still Photo Resolution 2560×1440
Max Video Resolution FHD: 1080/30fps HD: 720/30fps
Photo Format JPEG
Video Format MP4
Sensor CMOS 1/4″; Effective pixels: 5 MP
Operating Temperature Range -10 to 40 °C (14 to 104 °F)
Hit Detector
Detection Requirements
For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
Maximum Detection Frequency 15 Hz
EP Core
Weight Approx. 3.3 kg
Dimensions 320×240×270 mm (length × width × height)
Chassis Speed Range 0-3.5 m/s (forward), 0-2.5 m/s (backward), 0-2.8 m/s (sideways)
Max Chassis Rotational Speed 600°/s
M3508I Brushless Motor
Max Rotational Speed 1000 rpm
Max Torque 0.25N·m
Max Output Power 19 W
Operating Temperature Range -10 to 40 °C (14 to 104 °F)
Driver FOC
Control Method Closed-loop speed control
Protection
Overvoltage protection
Overtemperature protection
Soft-start
Short-circuit protection
Chip and sensor anomaly detection
Intelligent Controller
Latency [2]
Connection via Wi-Fi: 80-100ms
Connection via Router: 100-120ms (unobstructed, free of interference)
Live View Quality 720p/30fps
Max Live View Bitrate 6 Mbps
Operating Frequency [3] 2.4 GHz, 5.1 GHz, 5.8 GHz
Max Transmission Distance [4]
Connection via Wi-Fi:
FCC, 2.4 GHz 140 m, 5.8 GHz 90 m
CE, 2.4 GHz 130 m, 5.8 GHz 70 m
SRRC, 2.4 GHz 130 m, 5.8 GHz 90 m
MIC, 2.4 GHz 130 m
Connection via Router:
FCC, 2.4 GHz 190 m, 5.8 GHz 300 m
CE, 2.4 GHz 180 m, 5.8 GHz 70 m
SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m
MIC, 2.4 GHz 180 m
Transmission Power (EIRP)
2.400-2.4835 GHz
FCC: ≤30 dBm
SRRC: ≤20 dBm
MIC: ≤20 dBm
5.170-5.25 GHz
FCC: ≤30 dBm
SRRC: ≤23 dBm
MIC: ≤23 dBm
5.725-5.850 GHz
FCC: ≤30dBm
SRRC: ≤30dBm
Transmission Standard
IEEE802.11a/b/g/n
Intelligent Battery
Capacity 2400 mAh
Nominal Charging Voltage 10.8 V
Maximum Charging Voltage 12.6 V
Battery Type LiPo 3S
Energy 25.92 Wh
Weight 169 g
Operating Temperature Range -10 to 40 °C (14 to 104 °F)
Charging Temperature Range 5 to 40 °C (41 to 104 °F)
Maximum Charging Power 29 W
Battery Life in Use 35 minutes (measured at a constant speed of 2 m/s on a flat surface)
Battery Life on Standby Approx. 100 minutes
Charger Input 100-240 V, 50-60Hz, 1A
Output Port: 12.6 V=0.8A or 12.6 V=2.2A
Voltage 12.6 V
Rated Voltage 28 W
App
RoboMaster
iOS iOS 10.0.2 or later
Android Android 5.0 or later
Router
Recommended Routers
TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)
TP-Link Archer C7; NETGEAR X6S (International)
Recommended outdoor power supply solution for routers
Laptop Power Bank (match the input power of the router)
microSD card Supports microSD cards with a capacity up to 64GB